Made in the USA
|
 |
Protect against Tank Overflow or Pump Burnout by customizing your controller with HL and/or LL Alarm switches. Alarm switches are designed to work within the column to activate controllers when liquids reach a specific pre-determined level.
Choose the solution that is right for you
Your kit assembly contains a fully assembled controller bonnet, a Start and Stop switch, and a SPST HL Alarm switch, 2 floats, 2 stop collars, and column assembly. Nothing is complicated-no soldering or gluing is necessary. Just cut to length and position the sensor and alarm switches where you want them.
Stock alarm switches are wired N/O, but can be wired N/C upon request.
Your kit assembly contains a fully assembled controller bonnet, a Start Stop switch, and 2 SPST HL and LL Alarm switches, 2 floats, 2 stop collars, and column assembly. Nothing is complicated- no soldering or gluing is necessary. Just cut to length and position the sensor and alarm switches where you want them.
Stock alarm switches are wired N/O, but can be wired N/C upon request.
Control pumps or electric valves
Automatically fill or empty tanks
Open or shut solenoids
Shut off electric heaters if liquid level falls
Activate alarms to alert workers when off-normal level conditions occur
Form C, SPST
Contact Ratings: 10W max.
Switching Voltage: 250 VDC max.
Switching Current: 0.5A max.
Carrying Current: 3.0A max.
|
|
|
|
|
|
|
|
|
Mailing Address
PGK Inc.
P.O. Box 263
Hobart, WA 98025
|
|
